Menu Sidebar
Menu

Chris

Hi! I've got a new plugin you can have! These plugins come in Mac AU, and Mac, Windows and Linux VST. They are state of the art sound, have no DRM, and have totally minimal generic interface so you focus on your sounds.

StarChild

StarChildDemo is a universal binary Audio Unit plugin (PPC, 32 bit Intel and 64 bit Intel) that does a variation on the old Ursa Minor Space Station, but different. It’s a high purity stereo-only rendition of a raw and grainy antique digital spacemaker, all vibe!

Here’s how it works. Back in the really crude old days there were only delay lines. StarChild is doing a series of delay lines in a primitive, fixed point digital delay with a subtle pitch shift applied in an interesting, crude, grainy way characteristic of these really old processors. Is it low bit, for that low-res grit and crunch? Yes and no… that’s what the ‘grain coarse/fine’ control is for. It uses sustain duration to give roughly the amount of ‘hang time’ on the effect, but then the grain control determines how densely packed the delay taps are.

It’s implemented in such a way that coarse grain is insanely CPU efficient, and the fine grain is up to 162 distinct delay taps (more than antique digital processors could have done directly) and still very efficient for modern DAWs. The spacing of these taps is done using a set of hard-coded prime number delay times to keep overtones from reinforcing, so the only coloration you get is the overall ‘reverb’, and it’s done at four points in stereo to give you a spacious effect.

What does it sound like?

Like nothing else in this world. There’s a really strong ‘droning’ quality like certain Eno multitap delay effects, but concentrated on a fundamental ‘ring’ without affecting all possible harmonics of the sound. The pitch shift adds another level of strangeness and fuzz, barely noticeable but you’d miss it if it wasn’t built into the algorithm. There’s an airy quality that can also be a grungy quality at coarse grain… and the onset is softer than the rest of the sustain, making it a weird and amazingly unnatural sound that still blends with the dry signal in a very special way. And the way the attack is designed, the effect always ‘blooms out’ of a distinctly low-bit onset, which blurs and fuzzes out the attack of the ‘reverb’ keeping it from interfering with the dry signal. It’s like there’s always a little noise built into the attack of the thing, at whatever level you use, and the grain control determines how much of that you’re hearing.

It applies a super-strong flavor, but in a strangely useful way that doesn’t ruin the tone, just makes it richer and weirder. Both of the controls, sustain and grain, work to adjust the rough pitch center where all the jittering delay taps sit (they shift in ripples, one sample at a time for maximum scrunch, and one at a time rather than all at once for added texture).

For that hybrid of old-school and ultramodern electro madness, StarChild can’t be beat. It’s a true secret weapon, a bizarre little algorithm that sits sneakily in a mix just adding its alien mojo. You can have it barely audible and still it has a huge effect, or you can crank it right up and whack people with StarChild’s peculiar skronk, a texture that’s sure to jump out of any mix. You can make robot voices, electro drums, techno soundscapes, all with a glorious fuzzy digital obnoxiousness that screams ‘oldest of old school hardware box’.

StarChild is $50.

Aura

AuraDemo is a universal binary Audio Unit plugin (PPC/32/64 bit AU, for Mac) for dialing in the sparkle or sonority of a sound. It gives a kind of presence peak never done before in software, along with attenuation past that peak. Defaults to natural tone, or exaggerate it for hype!

Here’s how it works, and why you can’t do this by using the same response curve (seen in the video) on any EQ, digital or analog, no matter whose it is.

Aura’s not a complicated peak-and-notch maker, doesn’t operate with normal EQ algorithms or even ‘analog modeled’ EQ algorithms. It’s almost a Purest-line plugin. The ‘circuit’ being done in code is very simple and involves very few operations, much like a high-end preamplifier that works using very few discrete components. The operations it does do, however, increase the richness and sonority of ALL the sound, not just the stuff around the ‘aura’ voicing.

It averages out the rate of change OF the rate of change OF the waveform, and then lets you blend that result with the dry signal. That’s it, but nobody else has this (it would be extremely obvious if they did). One possible reason is the algorithm’s tricky? It took some real hacking to get it to act right as you adjust the voicing control: it doesn’t automatically work like a DSP cookbook EQ algorithm. I didn’t even know what it would do until I got the thing working and started to experiment.

Why’s it called Aura? Because using it, you get to wipe out information above a certain highlighted frequency (it’s sample-rate dependent so the voicing will tend to emphasize the highest reaches of whatever sample rate you’re using) but KEEP the information if it’s legitimately part of a waveform. Aura only keeps harmonics, and throws out noise and garbage. And it’s a very finely tuned cutoff, a real scalpel for singling out specific overtones. It does in a very simple algorithm what would take dozens of poles of DSP filter to not even do, and makes it sound amazing.

Consider that for a moment. How could you tell a steep lowpass, ‘get rid of only the stuff that’s not part of the harmonics of my waveform, okay? If it’s part of the big waveform, please keep it kthx, otherwise axe it. Oh, and give me a really steep notch over that because I want to take a nasty overtone out, but I don’t like the sound of really high Q digital EQ so leave that plasticky tonality out please. Oh and one more thing. Please run zero latency so I can track into you’.

You can’t, regular EQ (especially digital) tends to show the strain when you make it do crazy things like that. Regular digital EQ is better off doing broad cuts very cleanly. But Aura isn’t even an EQ algorithm, it’s something much simpler and this is what you get out of it: by its nature you get this tendency to hype and retain harmonics of musical waveforms, that’s at the heart of what it does. By its nature it does potentially extreme things without sounding overprocessed because it’s not overprocessed: it’s very simple in design. And it’s zero latency, just to drive home how different it is from typical plugins. It provides definition and intensity/sonority of tone beyond any EQ, for this one common EQ-like behavior.

The video shows it working on sounds from a Korg synth, such as strings and piano and banjo, but did you notice it’s also on my headset mic? To evaluate what Aura means to you, I’d advise grabbing the (Audio Unit) demo and trying it on sounds you normally use. It ought to be killer on any sort of vocals, particularly if there’s a high presence peak that’ll work for the sound. You can increase the voicing and bring it down into that high-middy obnoxious range that wouldn’t work for airy sounds, if your sound is darker like a piano or perhaps a bass, and it’ll refine the mids and give you loads of definition and articulation. And of course, any guitar sound, particularly heavy guitar sound, can become amazing through using Aura to dial in just the right presence peak slightly higher than the guitar speaker naturally puts out, so it extends the range while also notching out artifacts above that peak. You can get a whole range of flavors on cymbals, you can invent new sonorities for entirely digital synths… treat it as a kind of lowpassing, a very useful and common class of effect, but one that brings out your harmonics rather than dulling them and choking them off.

If I can make the same thing happen in a highpass, that will become a free update for anyone who got Aura (because it would be the most natural and best thing ever to bring Aura the ability to ‘trap in’ sounds on both frequency extremes). For now, I bring you the ultimate ‘lowpass kind of thing’ that’s technically not an EQ, but behaves a lot like one.

Aura is $50.

OneCornerClip

OneCornerClipDemo is a universal binary Audio Unit plugin (PPC/32/64 bit AU, for Mac) and one of the coolest things I’ve done in years.

It’s basically a special clipper where you can RADICALLY shape the tone of extremely distorted output without so much as touching any samples that aren’t clipped. The voicing control has a huge impact on the tone of the thing. The secret is this: once you clip, the waveform starts from where the last good sample was and begins rounding off the corner until the signal passes it going the other way. This means high frequency stuff gets well damped down, and it means you can reinforce low bass under conditions of super-obscene hyperclipping.

Then, exiting the clip, you get one perfectly sharp corner (much like if you were lowpass filtering a square wave). Hence, OneCornerClip. The corner becomes part of the waveshaping and stops sounding as much like digital clipping, because there’s only one per wave rather than two, and it’s in a more regular spot rather than being pairs of corners spaced at arbitrary intervals.

That part is true even for massively oversampled clippers: they’re still producing corners that are irregularly spaced depending on how far into clipping you went. OneCornerClip doesn’t do that, so it sounds like LOUD! not like plugin clipping. It feels like you’re cranking some physical device up, but without altering any sample that’s not clipped, without any kind of convolution or EQing or blurring. Clean samples are bypass, period.

For anybody who is trying to get fat EDM grooves to smash through all imaginable loudnesses forever, this is the tool. Dial in the voicing real low to bring out the kicks, you literally can’t lose kicks through smashing this thing. It depends on how you set it.

For anybody who likes taking a mix element like drums and going all NIN on them, producing an intense driving beat, this is also for you. The default voicing of 0.618 is quite good here but you can push it higher for a real aggressive rowdy top-end, or lower to produce drum-machine like effects on cymbals. As the voicing gets lower, cymbal overdrive will get more ragged and synthetic.

At very low or zero voicing settings, you get a dirty, grunged sound because you’re getting digital flat-topping but at many different output levels, never the same one. I’m pretty sure nobody else can do this yet and it doesn’t exist in anybody’s synths either. At a voicing of 1.0 you get literally raw digital clipping, nothing more: you can always hear what that’d be like, just by moving the slider.

Lastly, OneCornerClip can be used anywhere anytime: it’s very efficient, is coded ‘N to N’ so it can work on anything from mono to stereo to 7.1 surround channels (most of my plugins can do that!) and it has zero latency and zero delay. It’s like an analog device that does all this on the fly without getting bogged down in calculating and processing. Like the Purest line of plugins, it runs an 80-bit buss when it’s doing its thing, and when it’s not clipping it passes through the input value totally unprocessed, like bypassing the plugin completely. Heavily oversampled clippers can’t do that, and can’t match the rawness and pureness of OneCornerClip passing through normal audio.

I’m real excited about this one. I’m going to have a lot of fun with it, I think, and so will a lot of other people. Play with the demo and you’ll soon discover some amazing things are possible. And enjoy the video! I did! :)

OneCornerClip is $50.

ADClip5

ADClip5Demo is a universal binary Audio Unit plugin for loudness maximization. Bear in mind that CDs and Loudness War are going out of date and you don’t necessarily want loudness maximization anymore! I’ve made several versions of Righteous for aiming a mix/mastering at targets like YouTube or anywhere that applies replay gain. Though ADClip is still one of the most intense loudness maximizers around, I’m supporting it with new versions because it’s out there and still being used, not because I think it’s the future of mastering. It’s not (though it’ll still catch stray peaks exceptionally well).

At this time I don’t have the full version of this plugin for download :(

However, for those of you who use it differently or still slam levels like old school, ADClip5 has some amazing new features. The big one is a popup menu that lets you audition ONLY the clipped content (turn your monitoring down first!) or the treble/bass supplementing. Because that’s only safe to adjust if you can hear it, the ‘trim’ controls are back for both those features. They default to 0.1 which is the same as before, but now you can crank the effect up ten times as high. Reinforcing clipped-off highs gets you a ‘spikey’ harsh loudness like FG-X crapping out, reinforcing bass sort of spreads the bass out. Neither one should be at a significant amount of loudness compared to the regular track, especially the highs reinforcement, but since you can control it now it’s up to you. Being able to monitor it lets you hear exactly what’s being used, which might be a precaution.

The Clip Only setting lets you quickly find a max smashing level even if your ears get fatigued from too much loud smashy: if you can hear recognizable stuff on Clip Only, it’s going to be extra ugly when you listen back later with fresh ears. If Clip Only is in constant use but you can’t make out anything more than sputtering, you’re reasonably safe.

ADClip5 still uses its special ADClip entry/exit softening to suppress digital glare when pushed hard. It now declares no latency so you can track with it as part of a zero-latency setup, but it will delay the signal by exactly one sample: I figure that’s not going to affect performance timing, and on the 2-buss it won’t affect relative positionings of tracks. We might be able to see better DAW performance when all the plugins used are declaring zero latency, so I’ve made this change. For use in submixes and places where you’re smashing tracks with a clipper to get specific tones, I recommend looking at the new plugin OneCornerClip, which is more of a waveshaper and delays zero samples. ADClip needs to soften the exits from clips, so it can’t do that.

ADClip5 is $50.

Newer Posts
Older Posts

Airwindows

human-made bespoke digital audio

Kinds Of Things

The Last Year

Patreon Promo Club

altruistmusic.com

Dave Robertson and the Kiss List

Decibelia Nix

Gamma1734

GuitarTraveller

ivosight.com – courtesy Johnny Wishoff

Podigy Podcast Editing Service

Super Synthesis Eurorack Modules

Very Rich Bandcamp

If you’re pledging the equivalent of three or more plugins per year, I’ll happily link you on the sidebar, including a link to your music or project! Message me to ask.